

Article 2562 of rec.ham-radio.packet:
Path: philabs!philmtl!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!ucsd!rutgers!bellcore!ka9q.bellcore.com!karn
>From: [email-masked] (Phil Karn)
Newsgroups: rec.ham-radio.packet
Subject: Re: Local packet QSOs / dual band rigs?
Message-ID: <[email-masked]>
Date: 18 Sep 89 08:39:55 GMT
References: <[email-masked]>
Sender: [email-masked]
Reply-To: [email-masked] (Phil Karn)
Organization: Secular Humanists for No-Code
Lines: 7
Posted: Mon Sep 18 04:39:55 1989

I also have the IC-3200A. The receiver recovery time with that radio
is overly long. The fix is simple: open up the rig and remove diode
D19 in the audio output stage. This diode biases the output stage off
during transmit, but it is unnecessary because there are other audio
gates ahead of this stage.

Phil