Subject: Re: SANGEAN 803A DIN pinout please?
From: [email-masked] (Bernd Felsche)
Newsgroups: rec.radio.shortwave

>Could someone with a sangean service manual please send (or post) the
>pinout for the DIN connector on the side?  And more importantly, the
>levels and impedence?

>From the back of my owner's manual: (Schematic 86-2)
	3,4,5:	Common
	1:	Left
	2:	Right

The signal is passed from PCB A-1 to PCB B via connector J
(pins 1 and 2), a pair of 1uF caps, and a pair of 5k6
resistors. The signal is tied to common via 1k resistors.
Levels are as per DIN I expect, certainly lower than 0.7V p-p.

Connector J pins 1 and 2 are the same signal as for pins 1
and 2 of connector I which passes raw audio to PCB A-2.
Subsequently, (after treble, bass, balance and volume)
processed audio also passes onto PCB B.
-- 
+-----+  Bernd Felsche                      _--_!\   #include <std/disclaimer.h>
                                           /      \  [email-masked]
         328 Albany Highway,               X_.--._/          Fax: +61 9 472 3337
         Victoria Park, Western Australia 6100   v         Phone: +61 9 362 9355